The new HSP Henglong HPI and other vehicle and ship models dedicated high-voltage version 320A brushed ESC support 3S lithium battery
320A two-way electronic governor with brake (with waterproof function)
Battery support: Ni-MH, Ni-Cd 4~6 groups (4.8V~7.2V); lithium battery 3 groups (7.4V-11.1V)
Current parameters: 320A forward, 160A reverse, 270A brake,
BEC output: voltage 5.6V, current 2A. (Powering the receiver and steering gear)
Dimensions: 43mm (length) X 29mm (width) X 27mm (height). (Including heat sink part)
Weight: 40g
Feature:
1. Automatically find the center position.
2. High frequency drive system
3. Use low internal resistance field effect tube
4. Suitable for car and ship models
Operation guide:
1. Connect the power battery correctly, the red wire at both ends of the terminal block is the positive pole, and the black wire is the negative pole. (Or connect the standard DC battery plug Datian male plug/T plug/banana plug)
2. The red and black wires of the ESC output are respectively connected to the red and black wires of the automobile 540 motor.
3. Turn on the power switch of the ESC, the motor beeps, and then turn on the power of the transmitter, the motor beeps, it proves that the remote control signal has been successfully connected to the remote control. quit.
Note: If you want to connect the lithium battery to the ESC you bought, please pay attention to the product manual. The position of the jumper must be matched to avoid burning the ESC.